SV-603 Super Guard Alarm (PIR Sensor)

Installation:

The Infrared Light Detector is ideal to be installed at the compound that needs protection. It can be installed on the wall by hammering nail or enclosed adhesive tape. To put the detector under proper working condition, it is not advisable to be facing the sun light or direct light.

How to Use:

Flip the on/off switch to “ON” position, a “Du” sound will acknowledge the alarm is activated, and need to move away from detected compound in 20 seconds. The detector’s coverage area is up to 5 meters with the detection angle of 60 degree. When there is a body movement in the detected compound, the alarm will be triggered together will flash light to warn the intruder. The detector will come back to standby mode after 20-30 seconds. Flip the switch to the “off” position to turn off the unit.

Operation:

Use 3x1.5V LR44 battery (included in the unit). When the alarm volume becomes low, please remove the battery compartment cover and replace batteries with the same type.