-P.I.R. sensor activated.
-Placing near the door of shop or office to announce the entrance of visitor.
-Sensor range up to 5 meters, 60degree.

-Upon request, we can customize voice message on Auto Exit Reminder.

-Battery operated 3LR44 batteries or can connect 4.5V200MA adapter.
-Product size: 51×38×20mm

Installation:

The Visitor Chime (PIR Sensor) is ideal to be installed at the compound that needs detection. It can be installed on the wall by hammering nail or enclosed adhesive tape. To put the sensor under proper working condition, it is not advisable to be facing the sun light or direct light.

How to Use:

Flip the on/off switch to “ON” position, a “Ding Dong” sound will acknowledge the sensor is activated. The sensor’s range is up to 5 meters with the angle of 60 degree. When there is a body movement in the sensor compound, a “Ding Dong” sound will announce the entrance of visitor. The sensor will come back to standby mode after 3 - 5 seconds. Flip the switch to the “off” position to turn off the unit.

Operation:

Use 3x1.5V LR44 battery (included in the unit). When the volume becomes low, please remove the battery compartment cover and replace batteries with the same type.

Packing details:
G.W.: 8.5kgs.
N.W.:9.5kgs.
Each in blister with blister card.
Carton size: 36x39x35 cm.
200pcs/ctn.