SV-609P Auto Infrared Guest Greeting Sensor (Auto Advertising Sensor)

-Able to record 10 – 20 seconds “Greeting” or “Advertisement” according to individual requirement.

-An ideal Auto Guest Greeting Sensor or Product Advertisement for retail outlets, officers and other entry areas.

-Be a voice alarm for retail outlets, offices, homes or other locations

-Operated by 3×1.5V AAA battery or can connect 4.5V200MA adapter

-P.I.R. sensor activated

-Coverage distance 3-5m, detection angle 90 degree

-Product size 115 x 60 x 30mm

Installation:

The Infrared Sensor of Auto Guest Greeting Device is ideal to be installed at the guest entrance area. It can be installed on the wall by hammering nail. To make sure detector under proper working condition, it is not advisable to be facing the sun light or direct light)

How to Use:

Press the “Power on/off Button”, follow by press and hold the “Record Button”, the Record  LED light will on to indicate the Auto Guest Greeting Device is on recording mode, record your greeting and advertisement to the record port, release the button when finished  recording. When there is a body movement in detected compound (coverage area is up to 5 meters with the detection angle of 90 degree). The device will play your recorded “Greeting” or “Advertisement” to welcome your guest or introduce your product. After playing, the device will back to stand by mode. Press the “Power on/off Button” again to turn off the device.

Operation:

Use 3x1.5V AAA battery or connect to 4.5V200MA Transformer. When volume is low or unable operate normally, please remove the battery compartment cover and replace batteries with the same type.

Packing details:
Blister with blister card packaging, 200pcs/ctn. N.W.:4.5kgs, G.W.: 5.2kgs