SV-602  Visitor In & Out Greeting Sensor

-    Able to record 10 seconds each of “Guest Welcome” & “Guest Farewell” greeting, and can be tailor made according to individual requirement

-    An ideal Greeting Sensor (able to identify visitor in & out) for shop, office and other entrances

-    Operated by 2×1.5V AA battery or can connect 3V300MA adapter.

-    Sensing distance up to 0-2 meters (Under normal light condition).

-    Product size 123 x 62 x 31mm.

Installation:

Install the Greeting Sensor on the wall and direct the sensing point facing the visitor entrance area.

How to Use:

There is a “left & right’ selection button on left side of the Greeting Sensor. Push the button to “left’ if the sensor is installed on the left side of the entrance and vice versa. The power on/off button is on the right side of the sensor; push the button to “High” or “Low” (Volume), a “Hello! Welcome” announcement to indicate that the sensor is on working condition. When there is a person pass by the sensing point, the greeting sensor will able to identify in or out of the person automatically by announcing “Hello! Welcome” or “Thank you, Please come again”. Turn off the sensor by pushing the power on/off button to “off” position

 Operation:

Use 2x1.5V AA battery or connect to 4.5V300MA Transformer. When the volume is low, please remove the battery compartment cover and replace batteries with the same type.

Packing details:
Blister with blister card packaging, 200pcs/ctn.

N.W.:4.5kgs, G.W.: 5.2kgs.

Carton size: 55x30.5x33.5cm.